prikaz prve stranice dokumenta ANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA
Access restricted to students and staff of home institution
master's thesis
ANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:828426
Stazić, Josip
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Cite this document

Stazić, J. (2018). ANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:828426

Stazić, Josip. "ANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:828426

Stazić, Josip. "ANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:828426

Stazić, J. (2018). 'ANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 19 April 2024, https://urn.nsk.hr/urn:nbn:hr:153:828426

Stazić J. ANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 April 19] Available at: https://urn.nsk.hr/urn:nbn:hr:153:828426

J. Stazić, "ANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:828426

Please login to the repository to save this object to your list.
Metadata
TitleANALIZA IZVODIVOSTI MATEMATIČKI DEFINIRANIH STRUKTURA POSTUPKOM 3D ISPISA
Title (english)EVALUATING PRINTABILITY OF MATHEMATICALLY DEFINED STRUCTURES ON 3D PRINTER
AuthorJosip Stazić
MentorTomislav Galeta (mentor)
Committee memberTomislav Galeta (član povjerenstva)
Committee memberKatica Šimunović (predsjednik povjerenstva)
Committee memberGoran Šimunović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je prikazan postupak matematičkog modeliranja giroidne strukture, priprema modela epruveta za savojna i rastezna ispitivanja na kidalici, te priprema modela za ispis na 3D pisačima. S obzirom da je giroidna struktura veoma komplicirana, samim time dolazilo je do problema kod ispisa istih gdje se pojavljuju greške mrljavosti, odljepljivanja i zamaknuća kod ispisa. Eksperimentalnim putem utvrdilo se da je ispis tako složene strukture na 3D pisačima djelomično izvediv iako su postojali problemi kod ispisa. Rezultati ispitivanja i analize ukazuju da kod modela epruveta giroidne strukture dolazi do velikih odstupanja kod rasteznih i savojnih svojstava unatoč tome što su epruvete ispisivane istim postupcima i na istom pisaču što utječe na izazov ponovljivosti kvalitete ispisa.
Abstract (english)
The paper presents the procedure of mathematical modeling of the gyroid structure, the preparation of bending test tube models and extended testing on wooden boards and the preparation of a model for printing on 3D printers. Since the gyroid structure is very complicated, there is a problem with the printing where blotch errors occurred and lift-off from the printing bed appeared. Experimentally, it was found that printing of such complex structures on 3D printers are possible, although printing problems exist. The results of the tests and the analysis shows that the pattern of the tubular structure results in large differences in stretch and bending properties, although the tubes are printed same way on the same printer, which shows that there are problems with reproducibility of the print quality.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:828426
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
RepositoryRepository of Mechanical Engineering in Slavonski Brod
Created on2018-10-09 12:02:54